Wheels

Wheel Freehub Kit—(Includes Bearings & Pawls) 11/12 Speed XD—X0 HUBS/RISE 60 (B1)/ROAM 30/ROAM 40/RAIL 40/RISE XX/ROAM 50/60 (B1) Compatible With: HU-X0-A1, WH-RAIL-40-A1, WH-RISE-60-B1, WH-RISE-XX-A1, WH-ROAM-30-A1, WH-ROAM-40-A1, WH-ROAM-50-A1, WH-ROAM-50-B1, WH-ROAM-60-B1

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 146mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs with 135mm spacing - Type: Hollow Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 146mm - 1 axle per bag

- Eady to install - Spoke mounted - 2 per set

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3'' mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700

Similar to the stock wheel for Surly's Long Haul Trucker. - This wheel matches original equipment for Surly Long Haul Trucker. (26” Wheel)

Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black

Does the situation require more out of your equipment? Turn to Value HD for some extra beef! These wheels are built with everyday use in mind for heavy-duty applications. Featuring premium double wall rims, DT Swiss spokes, and sealed hubs, the Value HD Series upgrades the Value Double Wall Series lineup with even heavier load capacity and an expanded range of fitments. - Shimano hub - Rim brake use - Includes skewer - Center-Lock Disc brake compatible

Blending the versatility and performance of tubeless ready rims with a broad range of axle compatibility makes these wheels a great choice for service or upgrades options. Rims can accommodate tubes and clincher tires without modification. - Tubeless ready

Blending the versatility and performance of tubeless ready rims with a broad range of axle compatibility makes these wheels a great choice for service or upgrades options. Rims can accommodate tubes and clincher tires without modification. - Tubeless ready

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 63mm

Tubeless valves for DT Swiss rims for repair or replacement. - DT Swiss Narrow Base Tubeless Valve - 73mm

Get the most out of your next off-road adventure with the durable G 1800 wheels, meticulously developed with carefully selected components. Its wide rim offers comfort and versatility. Equipped with sturdy spokes and a reliable Ratchet freehub system, it effortlessly takes you off the beaten path. Don't think about it, just mount it on your bike and start packing for your next bikepacking adventure. - Aluminum, sleeved rim joint, hooked bead, tubeless ready - DT Swiss 370 Straightpull hubs with Center-Lock disc mount - Includes DT Swiss tubeless ready tape (mounted) and DT Swiss alloy tubeless valves - 18T Ratchet LN System

This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

WHY WE MAKE THIS Originally, we made this hub to be the cornerstone of our hub product line. It was one of those product releases where we put all our hub and bearing experience into, and ended up with a hub that struck that perfect balance between weight, performance, durability and looks. Since the advent of disc brakes (and the R45D), we keep making it, because it’s still that cornerstone hub, and so many of our riders still love to rock their rim brakes on road and off. WHY YOU WANT IT The R45 front hub is lighter and more aerodynamic than most built-to-last hubs on the market. We use a narrow hub body and low flanges to make the R45 a rock solid starting point for any fast wheel build. Our bearings, both steel and ceramic, have heat-treated, surgical grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings is what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. -Steel Bearings - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Easily serviceable with a 2.5mm hex and pick or pen knife - Completely re-buildable with our R45 Hub Service Tool - Available in 28h and 32h - Ceramic bearing upgrade available HUB SPECIFICATIONS - Axle Width: 100mm - Flange Diameter DS & NDS: 39.8mm - Center to Flange DS: 34.8mm - Center to Flange NDS: 34.8mm

These original replacements will get your wheels working like new. - Alloy thru-axle that can be used with a 6mm hex wrench or with a lever - Keep it light by removing the lever and instead use a 6mm hex wrench - Keep it convenient by keeping the lever inside the axle - Lever is held securely by internal O-ring - Lever sold separately

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

Trainer Caps allow thru-axle bikes to be used with most wind, magnetic or fluid cycling trainers. Cold weather and short days are never far from a Minnesotan's mind so Wolf Tooth engineers created Trainer Caps to reduce barriers to winter workouts. Non-drive side axle caps are joined by drive-side plugs that can be installed or removed without tools to make the prospect of hopping on the trainer a little more bearable. - Compatibility: Wolf Tooth Rear Axles (not compatible with rear axles from other manufacturers) - Plug has O-ring retention – no tool required