Packs/Racks/Baskets

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install

- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.

- Made in U.S.A. (Maysville, KY) - Dimensions: 20.5 x 13 inches - Extended handlebar clamps are 2" apart, allow greater clearance for shift and brake cables, and fit 7/8", 1", and 1 1/4" diameter handlebars - Legs extend from 13 3/4" to 21 1/4" and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - Powder Coat Finish - Complete rack with fittings weighs 6.0 lbs.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

- A weather proof trunk bag not only capable of storing and carrying personal goods but also safely stores extra E-Bike batteries - Expandable top and side sections make full panniers to maximize capacity - Integrated MTX QuickTrack 2.0 system compatibl

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

The Sugarloaf Basket Bag is designed to fit perfectly into the classic Wald 137 basket. It is fastened in place at either side with a reliable and easy-to-use buckle. The Sugarloaf is an ideal companion for anything from daily commutes to overnight adventures or gravel expeditions. Add a Sidekick Stem Pouch or Rando Pocket to your basket for some extra organizational capacity. The Sugarloaf Basket Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 10 plastic bottles rescued from ocean beaches. Built With: - 400D Packcloth Lining - Closed-cell foam cushion base to protect valuables - Seat belt webbing handles - Handles secure with center-snap - Exterior forward-facing zipper entry pocket - Exterior Rider-facing magnetic closure organizer pocket - Secure fastex buckle easy-on/easy-off attachment to the basket - Interior pockets for additional organization - Reflective touches on attachment wings - D rings for shoulder strap compatibility - YKK water resist zip on the main compartment - Made in Seattle, WA out of recycled materials Dimensions: - Measurements: 14"w X 7h" X 7"d - Capacity: 11.5 L - Weight: 13.5 Oz - Looking for more capacity? Check out our 30L Motherloaf Basket Bag.

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included

- Front rack with foldable sides for an expandable platform size - Sturdy powder-coated alloy construction - Can be attached to brake mounts or threaded accessory eyelets - Adjustable legs fit 26" – 29" frame sizes - 22lb weight limit - Disc Compatible: No

Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

The Back-Roller Core is the solid base bag among the Back-Rollers and yet 100% waterproof. With its robust polyester fabric, it's not only suitable for extended bike tours but also ideal for daily urban commutes. With the Back-Roller Core, you're always ready to transport important items dry and securely – whether it's on your way to work, shopping, or other urban adventures. A reliable companion that withstands the elements and simplifies your everyday life. If the basic functions of the Back-Roller Core are ever insufficient, this practical bag can be expanded with various optional accessories. The Carrying System Bike Pannier helps carry the Back-Roller Core on your back, various inserts provide stability to the bag body off the bike, or offer better organization inside the rear bike bag. FURTHER PRACTICAL DETAILS - High-visibility reflectors on the outside of the bag.

Your spacious one-click shopping bag: the Bike-Shopper with QL2.1 system can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable – even on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from the rain. Occasional use of ORTLIEB lubricant will keep the closure running smoothly. Further Features: - Internal valuables pocket in size DIN A4 - Padded carrying handle - Lateral 3M-Scotchlite reflectors Advice: Temperatures below -5°C/23°F may affect the function of the sealing lip!

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Plenty of space for your day at the office—no matter whether your office is in a meadow, a cafe or an old factory building on the other side of town. The Ortlieb Commuter Daypack City is a waterproof city backpack made of lightweight, durable nylon fabric. With its roll closure, its large main compartment, and its padded notebook compartment, it provides a secure place for your documents and other gear no matter what the weather. And thanks to its outstanding carrying comfort, it's always a pleasant companion to take along. Further features: - Reinforced underside - Air-permeable shoulder straps - Back padding with ventilation channels - Removable breast and waist straps - Zippered front pocket (not waterproof) - Loops for rear light and U-lock - Reflective yarn and reflective logo for more protection at night - Dimension notebook compartment: 39cm x 27cm x 2.5cm / 15.4" x 10.6" x 1"

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

Minimalism to the max is a good description of the ultra-lightweight seat pack for road bikes and mountain bikes. The Micro Two was specially designed for those demanding tours when every gram counts. In addition to being 100% waterproof, the pack offers you space enough for a few critical items such as a replacement tube, a bike kit, or first aid materials. Its roll closure and elastic drawstrings allow you to collapse its size down to a minimum. And thanks to its extremely small dimensions, it can be mounted to your bike in an extremely space-saving manner. Simply attach the mounting bracket to your seat stays. Then attach or detach the pack with a single hand using the snap buckle. While the snap-on system was again enhanced for user-friendliness, the Micro Two remains compatible with all previous models. Further Features: - PVC-free, polyurethane-coated nylon fabric - No protruding plastic parts on the inside - Includes the mounting bracket - Simple attachment - Reflector

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm